Altium designer 17 multiboard free.Multi-board Design with Multi-board Assembly
Altium Designer enables engineers to effortlessly connect with every facet of the electronics design process. Over 35 years of innovation and development. Multi-PCB Design Altium Designer 18 Henk de Jonge Technical Director Altium BV Add Multi-PCB documents to the project: Multi-Board Project document (*. How to create multiple PCB designs using the same Altium Designer project.
Altium designer 17 multiboard free
Parent page: Designing Systems with Multiple Boards. A printed circuit board does not exist in isolation, they are often assembled and connected together with other boards, which are then housed altium designer 17 multiboard free a case or enclosure. Helping to altium designer 17 multiboard free through this stage of the design process, the software supports creating a multiple-board assembly, referred to as a Multi-board assembly.
This process will load the PCB referenced by each logical block in the multi-board schematic, into the multi-board assembly editor. This article discusses that process. To learn more about the logical design stage of a multi-board assembly, refer to the page Capturing the Logical System Design. Multi-board projects and their associated sub-projects can be saved to an Altium Workspace, where they can benefit from the version посетить страницу, sharing and management capabilities provided by altium designer 17 multiboard free on-site Altium server Workspaceor a cloud-based Altium Workspace.
The multi-board assembly is the physical representation of printed circuit boards in your system. Refer to the article Capturing the Logical System Design to learn more about creating and verifying the multi-board schematic. To add a new multi-board assembly document to the active project, you can use the following commands:. Once the assembly document has been added to the project, right-click on it to save and name it.
A Multi-board Assembly has been added to the system-level project. The multi-board design is transferred from the multi-board schematic to the multi-board assembly document using either of the following commands:. When you run one of these commands, the software interrogates each Module on the multi-board schematic, identifies the PCB that has been altium designer 17 multiboard free for each of the child PCB projects, and presents the list of modifications required to add each of those boards to the assembly, in the Engineering Change Order dialog.
When the Execute Changes button is clicked, the boards are loaded into the multi-board Assembly editor. Altium designer 17 multiboard free board is placed in the workspace in the same orientation that it has in the PCB project. This process will take some time, as the full dataset for each PCB must be analyzed and loaded.
The four boards in this multi-board assembly loaded into the Assembly editor workspace, ready to be positioned. Multi-board assemblies created in a previous version of Altium Designer must be imported due to file format changes required to support the 3D engine and the improved feature set. When an old-format MbaDoc is opened, the Legacy document import dialog will open.
Select the Design » Import command in the multi-board Assembly editor to generate ECOs altium designer 17 multiboard free will reload the child modules. This process may take some time, as the multi-board Assembly editor loads the entire PCB file data. Because of the file format changes required to support the improved feature set and the 3D engine, a multi-board assembly saved in this release of Altium Designer cannot be opened in older versions of Altium Designer.
If this is attempted it will open as an empty document. In line with the schematic and PCB editors, the multi-board Assembly editor includes an Active Bar located at the top of the workspace. The Multiboard Assembly panel is used to navigate and manage a multi-board assembly. The panel presents an expandable tree view of the complete assembly structure, not unlike the Projects panel, and includes all PCBs in the assembly, the altium designer 17 multiboard free, layers and nets within each PCB, and any included STEP models.
The Multi-board Assembly panel showing an assembly of 4 Altium designer 17 multiboard free, and the top and bottom sections of the case. It also allows addition boards, STEP models and other MBAs to be added into the assembly, and the visibility of selected part s to be toggled off or on.
The Multiboard Assembly panel provides highlighting capabilities, where the part selected in the tree is highlighted in the workspace. The highlighting is bi-directional, therefore, the selection state of panel entries will change altium designer 17 multiboard free response to altium designer 17 multiboard free that have been selected in the workspace.
Two boards selected in the workspace are also highlighted in the panel. The highlighting feature provides an excellent method of locating a specific part, for example, finding a component or examining the altium designer 17 multiboard free buy office 2010 home and student free download a set of nets as they pass under a жмите. As well as highlighting a specific part or parts, the panel can also be used to control the visibility of the parts currently selected in the panel.
To hide the selected part sright-click then select Visible from the context menu. The selected part s will disappear from view, although, while they remain selected, they will continue to be visible. Click on another part or anywhere in the workspace to deselect them and switch off their visibility.
The animation below shows the Search feature at the top of the panel being used to locate the fan, which is then hidden. To help with working with hidden parts, hidden parts are made visible whenever they are selected. Three different types of additional parts can be added into a Multi-board assembly in the Multi-board Assembly MBA editor.
Note that a part is inserted into the Multi-board assembly as a single entity. For example, if you insert the STEP model for a case, which consists of a top half and a bottom half, you will not be able to manipulate these halves independently.
In this situation you need to insert each half into altium designer 17 multiboard free assembly, separately. Collisions are flagged whenever two objects have surfaces that touch or intersect. Mated surfaces are not considered to be colliding. The multi-board assembly editor supports rigid-flex PCBs. When you first transfer the boards into the Assembly editor, they are neatly placed on the same plane – you can imagine them as all being laid out next to each other on a virtual table.
Within a few minutes, you will have moved this one, rotated that one, and pulled another one closer to you! And then you will have rotated the view, now you’re not even sure which way is up! Working in a 3D design space requires skill in managing your view into that space, перейти skill in manipulating the objects within that space. These are separate skills, controlling your view of the space, and positioning the boards within that space – let’s start with the techniques you use to control your view of the space.
Once you have mastered reorienting the view, you will be ready to learn how to position and orient the boards. Your view of the assembly can be controlled via the keyboard and mouse, or you can use a use a 3D mousesuch as the Space Navigator. You can change the view of the assembly editor to Perspective or Orthographic by toggling the View » Toggle Projection Type command http://replace.me/27968.txt use the P shortcut from the main menus.
When you select a board another gizmo appears; that one is called the Object Gizmo more details below. The Workspace Gizmo is always displayed down the bottom left.
As you hover the mouse over a colored Gizmo element it will become lighter, indicating that it is active. When you click on that color, the view will reorient so that you are looking down that axis adobe fireworks cs6 serial number crack free the assembly.
A second click will flip the view over, looking down the same axis from the other direction. The table below gives more details about the various behaviors. Use the Workspace Gizmo to change the orientation of your view. Many of the view movements you can perform are not referenced from the workspace axes, instead, they are referenced to your current view.
Your current view is referred to as the Current View Altium designer 17 multiboard free, it is the plane you are currently seeing looking into your monitor.
For example, when you zoom in the workspace contents are bought closer to you, altium designer 17 multiboard free of the current angle of the workspace axes. Your current view can be changed using mouse and keyboard shortcuts.
The View Configuration panel is altium designer 17 multiboard free to configure the color and workspace visibility options in the Multi-board Assembly editor. It is also used to control the display of the section view, and the section panels. The Multi-board Assembly editor’s View Configuration panel. In the Multi-board Assembly editor, each workspace axis, and its corresponding plane, is assigned a color:.
A Section View is a view that can be used to reveal detail within an assembly, that might normally not be visible. This is achieved by defining a plane where a section of the assembly is cut. The Multi-board Assembly editor supports defining a section plane along each of the 3 axes, allowing the section definition to be in 1, 2, altium designer 17 multiboard free 3 directions.
The color of each section plane is configured in the System Colors section of this нажмите чтобы прочитать больше. Each layer includes a small color button, click this to display the color selector, as shown below.
Certain workspace features such as Selectioncan be displayed or hidden. Click altium designer 17 multiboard free eye icon to toggle the visibility off and on. A section view is one that can be used to reveal detail within an assembly that might normally not be visible. This is achieved by defining planes where a section of the assembly is sliced or cut away.
The multi-board assembly editor supports defining a section plane along each of the three axes, allowing altium designer 17 multiboard free section definition to be in altium designer 17 multiboard free, 2, or 3 directions. In Edit mode, the Section Planes are displayed; each plane is indicated by a colored semi-transparent altium designer 17 multiboard free radiating away from the Section View origin.
The Section View origin is defined by the three colored arrows, referred to as the Section View Gizmo. You can enable their display and configure their direction in the View Configuration panel in the Section View region. A simple example of a Section View.
Hover the cursor over the image to switch from Edit mode to On mode. Depending on the location of the assembly in altium designer 17 multiboard free workspace, the entire assembly may disappear be cut away when Section View mode is enabled. Switch the Section View to Edit mode to display the Section Planes, then click and drag on the Section View Gizmo to move the section view plane s to the required location.
To export the entire assembly in Parasolid format, select File » Export » Parasolid from the main menus. You also can load additional objects into a multi-board assembly as well as the PCBs referenced in the multi-board altium designer 17 multiboard free.
Additional objects referred to as parts can be loaded using the Design menu or by using the buttons located at the top of the Multi-board Assembly panel.
Note that a part is inserted into the multi-board assembly as a single entity. In this situation, you need to insert each half into the assembly separately. Using Altium Documentation. Use the View » Toggle Units command from the main menus or the Q shortcut to toggle the units between imperial and metric.
Each entity, or item in a Multi-board assembly is referred to as a Part. For information about designing with rigid-flex, click here. In the Multi-board Assembly editor, each workspace axis, and its corresponding plane, is assigned a color: Red – X altium designer 17 multiboard free, viewing into the Y-Z plane.
You can think of this as the front or rear view. Green – Y axis, viewing into the X-Z plane. You can think of this as the left or right view.